Text
Do you need to replace a tire on your Taylor-Dunn cart? We can help! Explore our guide to Taylor-Dunn tire replacement and maintenance here.
When it comes to maintaining your Taylor-Dunn vehicle, the safety and reliability of your tires are crucial factors to consider. Knowing when to replace your tires and how to do it properly is essential to ensure smooth operations in your warehouse or industrial workplace. Below, we’ll explain everything to know about replacing a Taylor-Dunn tire, including how to tell it’s time for a replacement, how to swap tires, and how to maintain your new tires for extended longevity.
How To Know Your Taylor-Dunn Needs a Tire Change
Before swapping out the old tires for new ones, ensure that the problem with the Taylor-Dunn cart is the tires. There are a few signs to look out for when determining if your Taylor-Dunn vehicle needs new tires.
Treadwear: One of the most obvious indicators is the tread wear on your tires. If the tread is worn down and has little to no grip left, it’s time for a tire replacement.
Visible damage: Check for any visible damage on the tire, such as cuts, punctures, or bulges. These can compromise the tire’s structural integrity and should be replaced immediately.
Age: Tires have a limited life span, even with proper maintenance and care. If your Taylor-Dunn vehicle is using tires that are more than five years old, it’s time for a replacement.
Uneven wear: Pay attention to how your tires are wearing. If there is uneven wear on the treads, it could indicate an issue with the vehicle’s alignment or suspension and should be addressed before replacing the tire.
How To Change a Taylor-Dunn Tire
Now that you know when to replace your Taylor-Dunn tires, let’s go through the steps of changing them. It’s a relatively simple process but requires proper equipment and safety precautions.
Gather Necessary Tools
Before starting the tire replacement process, gathering all the necessary tools is important. You will need a jack, which lifts and supports the vehicle, a lug wrench for removing the lug nuts, and a spare tire suitable for your Taylor-Dunn vehicle.
Prepare Vehicle for Replacement
Before you begin replacing the tire, make sure to park your Taylor-Dunn vehicle on a flat and level surface. Engage the parking brake and turn off the engine. Place wheel chocks around the other tires, if possible, to prevent movement.
Lift Vehicle on Jack Stands
Next, you must lift the vehicle using a jack and place jack stands under the frame for support. Follow the manufacturer’s instructions when using a jack and always double-check that the vehicle is securely lifted before removing the tire.
Choosing a Tire
When choosing a replacement tire for your Taylor-Dunn vehicle, it’s essential to ensure that it is the correct size, load rating, and speed rating. Using unsuitable tires for your specific vehicle can lead to safety hazards and performance issues.
Additionally, different types of tires are available for Taylor-Dunn vehicles, depending on their intended use. Pneumatic tires are best for outdoor and rough terrain use, industrial tires are designed for heavy-duty applications, and foam-filled tires provide extra durability and resistance to punctures. Be sure to select the appropriate type of tire for your specific needs.
Remove Old Tire
First, use a lug wrench to loosen the lug nuts on the wheel to remove the old or damaged tire. Then, using a jack stand for support, carefully lift the tire off the vehicle and set it aside. Be sure to dispose of any damaged tires properly according to local regulations.
Install New Inner Tube (If Needed)
The inner tube is an inflated rubber tube that sits inside the tire. It acts as an additional protection against punctures and maintains proper inflation. If your Taylor-Dunn tire has a puncture or damage to its inner tube, it must be replaced before installing the new tire. To do so, remove the old inner tube using tire levers and carefully insert the new one, ensuring it is properly aligned. Once in place, inflate the inner tube to the recommended pressure before installing the new tire.
Mount New Tire
To mount the new tire onto the rim, start by placing one side of the tire onto the rim. Then, using your hands or a tire tool, work around the rest of the tire to ensure that both sides are evenly positioned into the rim groove. Once you have confirmed this, carefully lower the vehicle back down and tighten the lug nuts in a star pattern. Be sure not to overtighten the lug nuts, as this can cause damage to the tire and rim.
Inflate Tire
After the new tire is mounted and the lug nuts are securely tightened, it’s time to inflate it to the recommended pressure. Use a tire gauge to ensure the tire is inflated correctly, as overinflated or underinflated tires can affect vehicle performance and safety. Once inflated, double-check all connections and make sure everything is properly secured.
Safety Check
After installing the new tire, it’s important to perform a safety check to ensure everything is in working order. Start by visually inspecting the tire for any visible damage or signs of improper installation. Then, do a test drive at low speeds and gradually increase speed to ensure the tire is properly balanced and aligned. If you feel any vibrations or notice unusual handling, having a professional mechanic check your work is best. It’s also important to regularly monitor the tire pressure and tread wear after installation to ensure proper maintenance and longevity of your tires.
Tire Maintenance Tips
Tire maintenance is crucial for the longevity and performance of your Taylor-Dunn vehicle. Regularly checking and maintaining your tires can help prevent premature wear and tear, unexpected breakdowns, and potentially dangerous situations. Here are some simple tips to keep in mind for tire maintenance:
- Check tire pressure regularly
- Rotate tires every 5,000 miles
- Keep tires clean and free of debris
- Avoid overloading your Taylor-Dunn
- Get a professional inspection
Get Taylor-Dunn Tires and Other Parts at Intella Parts
Now, you basically know everything about replacing a Taylor–Dunn tire from start to finish. By following the tips provided, you can safely and effectively change your Taylor-Dunn tires and keep your new tires in top condition for longer. If you need new equipment for your Taylor-Dunn, Intella Parts has a wide selection of Taylor-Dunn parts, including tires, at competitive prices. Visit us online to browse our inventory and find the perfect replacement parts for your Taylor-Dunn vehicle today!
